In order for the investment in new hardwood flooring to last a life, it is vital to comprehend the differences in engineered and solid hardwood floors. Several aspects must be considered to pick the choice for each situation. Homeowners can feel good about picking their hardwood flooring should they know a few fundamentals.
Solid Hardwood Flooring
Solid hardwood Flooring is milled from one piece of timber and its available either unfinished or prefinished. Engineered hardwood flooring is sanded, stained and coated onsite after setup. This procedure allows for custom stain colors to match a home’s décor or just to create a special appearance. The disadvantage to unfinished flooring is that there is often a substantial mess from sanding the floors in addition to fumes in the stain and urethane coatings. Quality builders do have equipment that will minimize the dust. They might also offer you low VOC stains and water-based urethane coatings to decrease the fumes associated with oil-based products. This finishing process can be achieved multiple times later on to restore the beauty of the flooring as it wears over time. Solid hardwood flooring is installed over a wood subflooring material since it is usually nailed or stapled into the subsurface.
Engineered Hardwood Flooring
Engineered hardwood Flooring is a mixture of multiple layers of wood veneers and a synthetic substance that are laminated together to form each plank of floors. This synthetic substance serves as the bottom layer and is generally impervious to moisture. This resistance makes chambers which are below grade and this exceptional option for subfloors. All flooring comes prefinished in the mill. The benefit to prefinished hardwood flooring in Toronto, ON is that the mill is more or able to coat the end as many as 7 times. This makes. Nonetheless, the layers can be scratched or damaged by water and of floors are made from wood. Engineered hardwood floors will be much thinner than solid hardwood floors and it is often glued to the subsurface although it may also be nailed or stapled.
Laminate flooring is made from synthetic materials and contains no wood products. Because of this, laminate flooring is resistant to moisture. The finish of floors is incredibly durable and plastic-like. Laminate flooring is offered in a wide assortment of colors and finishes that mimic wood floors, tile and stone. Laminate flooring is often known as a floating floor as it does not require the use of nails or adhesive to adhere it to the subsurface. This is a fantastic option for areas that see an extremely significant traffic volume or are vulnerable to scratching or gouging for different reasons like pets.